1080P Output Payment Terminal Board with 8-Inch Display, WF-SPT-05

TL;DR: 1080P Output Payment Terminal Board with 8-Inch Display

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving international market, Ireland. The WF-SPT-05 smart payment terminal Android motherboard covers the dual-screen smart payment terminal build for chain checkout and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 4-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Ireland importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

AndroidSBC builds smart payment terminal Android motherboards for the unattended and attended ends of the same market. A international market buyer can take a countertop configuration for a shop counter and an outdoor configuration for a charging pillar from one supplier, on one Android baseline, with one SDK. Firmware is treated as a managed asset on this family. Ireland estates receive staged OTA groups with rollback, signed images and a published maintenance window, so a international market operations team can schedule an update rather than react to one.

WF-SPT-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-05 (dual-screen smart payment terminal build for chain checkout) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Ireland importers sourcing the WF-SPT family, the WF-SPT-05-A variant is the typical configuration for the hypermarket and supermarket chain checkout lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Ireland Buyers

The hidden cost in Ireland rollouts is the integration labour, not the silicon. A board that arrives with a validated printer profile, a documented scan mapping and an SDK that matches the shipped image removes weeks from a international market project plan.

The second problem is paperwork. Aan Ireland shipment needs CE marking with ComReg radio interface notification documentation that matches the actual configuration on the pallet, not a generic file copied from an older lot, and the international market customs broker is the one who pays when it does not. AndroidSBC holds the 71000 board sample lot, the production slot and the compliance file on one schedule for international market, so the 8th release of the quarter is a shipment rather than a negotiation.

Competitive Comparison: WF-SPT-05 vs Competing Smart Payment Terminal Motherboards

Aan Ireland integrator comparing two boards should compare the delivery file, not the datasheet. One side ships a test report and a compliance set; the other ships a board and a promise.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Ireland integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

For international market integrators the market signal is simple - contactless and QR now carry the majority of face-to-face volume in Ireland, so the board is specified around the reader and the camera first and the keypad second.

• Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-09 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

The Ireland demand curve rewards the vendor who can hold a configuration. AndroidSBC treats a frozen bill of materials as the product feature that matters most to a international market integrator with an estate to maintain.

WF-SPT-05 Application Scenarios

The WF-SPT-05 dual-screen smart payment terminal build for chain checkout sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-05-A configuration is the typical build for the hypermarket and supermarket chain checkout lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-04 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-04 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for international market Buyers

Three commercial structures cover almost every Ireland programme AndroidSBC runs, from a distributor buying against a price list to a brand shipping its own label.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks ship from the same source factory with the same compliance file, which is why international market partners can move between them as aan Ireland programme grows.

Frequently Asked Questions

Does the smart payment terminal board family support a dual-screen payment terminal build for chain checkout?

Answer: Yes. The dual-screen payment terminal build for chain checkout ships as a standard configuration, qualified on the Longgang bench with the printer mechanism, the reader antenna and the scan engine that the international market integrator will install.

Which configurations are available in the WF-SPT family for Ireland buyers?

Answer: Twelve configurations span Rockchip RK3576 and the rest of the range: RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527, all on one peripheral contract.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. One WF-SPT board drives the touch panel, the thermal printer and the scan engine simultaneously, and the current budget for all three is measured on the bench and written into the shipment file.

What payment scheme certification support does AndroidSBC provide for Ireland?

Answer: The compliance file for Ireland covers CE marking with ComReg radio interface notification testing and ComReg conformity, issued against the exact configuration that ships to international market rather than a generic family file.

What is the minimum order quantity and the sample lead time for Ireland?

Answer: AndroidSBC quotes samples from one unit with a 1-3 day lead time, holds the configuration for the length of the agreement, and publishes volume tiers from 500 boards for Ireland programmes.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering team supports driver development, API integration, locale packs and application pre-install, and the resulting image is signed and staged into OTA groups for international market.

How are firmware updates delivered to aan Ireland device estate after deployment?

Answer: Firmware is delivered as signed images through staged OTA groups with rollback, so aan Ireland estate can be updated in waves rather than all at once, with a published maintenance window.

What shipping terms does AndroidSBC support for Ireland orders?

Answer: Shipments to Ireland clear through Port of international market on a weekly lane, with the packing list keyed to the configuration code and the certificate set inside the same carton.

Contact AndroidSBC: Start Your WF-SPT-05 Sourcing Conversation

AndroidSBC works with distributors, integrators and brand owners in Ireland. Tell the team which track fits and the proposal comes back against a published price list.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The Longgang source factory holds capacity at 5000 boards per week for Ireland programmes. international market partners get a frozen bill of materials, a published price list and a compliance file matched to every lot.