SATA 3.0 Guide Motherboard for Dual-Screen Guide, WF-G3399, AndroidSBC, Dublin

TL;DR: SATA 3.0 Guide Motherboard for Dual-Screen Guide

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-G guide kiosk board family serving Dublin, Ireland. The WF-G3399 smart guide kiosk Android motherboard spans the dual-screen high-definition guide kiosk and eleven sister models in the WF-G series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 64-bit SoC with the ARM Mali-T860 MP4 GPU, dual HDMI 2.0 4K output plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Dublin and Ireland importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group and the source factory behind the WF-G smart guide kiosk Android motherboard family. The Longgang plant runs SMT, in-circuit test, functional test and a burn-in station under one roof, with a sustained output of roughly 5000 boards a week on this family and buffer stock held on the RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 tiers. For Dublin integrators that matters at two points in a guide kiosk project: the pilot build, where a 1-3 day sample lead keeps a mall opening date honest, and the volume ramp, where a fixed BOM per production lot keeps Ireland certification files valid across every floor and every site. AndroidSBC keeps buffer stock on the Rockchip and Allwinner tiers so Dublin and Ireland orders do not wait on a wafer allocation, and each production lot is locked to one BOM for traceability.

WF-G3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3399 (dual-screen high-definition guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Ireland importers sourcing the WF-G family, the WF-G3399-A variant is the typical configuration for the hotel lobby and resort directory terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Ireland Buyers

The ninth obstacle is fleet software management. A Dublin rollout can reach hundreds of screens across a mall group fast, and without staged update control and rollback, one bad content build takes the whole Ireland estate down on the same morning.

Thermal and enclosure fit is designed in. Ireland programmes that put boards inside sealed floor-standing housings or outdoor pillars can specify the wide-temperature variants, and AndroidSBC reviews the enclosure airflow and power budget with Dublin integrators before the layout is frozen. ComReg and the CE marking with ComReg radio interface notification file set accompany the Port of Dublin shipment. The export desk confirms 130600 boards for Dublin, Ireland on the Dublin - Rotterdam lane as of September 18, 2026, the 8th release on this programme.

Competitive Comparison: WF-G3399 vs Competing Smart Guide Kiosk Android Boards

For Ireland buyers the practical comparison is between a vendor that ships a board and a vendor that ships a deployable platform. Dublin integrators evaluating the WF-G family usually score silicon coverage, peripheral drivers, unattended features and OTA control as a single decision.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Certification burden is shaping vendor selection. As Ireland tightens radio, electrical and accessibility conformity for public-facing terminals, Dublin buyers increasingly score vendors on whether the compliance dossier, the EMC reports and the safety file travel with the lot. IDC notes the same shift in enterprise device procurement, where supply continuity and regulatory readiness now weigh as heavily as unit price in dual-screen high-definition guide kiosk platform choices.

• Mall floor directories and tenant finders: WF-G3399 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3600 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3600 and the industrial WF-G3601 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3601 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

The number that actually moves a Dublin project is not the market total but the board count per venue, and that is where a multi-tier family earns its keep.

Partner Success Story: Gulf Venue Ventures (mall and mixed-use developer supplier)

A Gulf Venue Ventures deployment in the GCC retail and hospitality segment illustrates how the WF-G guide kiosk board family supports Dublin integrators. Gulf Venue Ventures deployed 130600 WF-G mall guide boards across flagship malls and mixed-use concourses in the GCC.

• OEM relationship: AndroidSBC private-label SKU shipped with Gulf Venue Ventures branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ComReg conformity, all bundled into the Shenzhen source-factory shipment.

Gulf Venue Ventures Director of Guest Experience for GCC Retail and Hospitality noted: Gulf Venue Ventures runs Arabic and English interfaces on the same estate, and the multi-language support on the WF-G board let Dublin sites switch content per screen without maintaining two firmware images.

Field Report: lobby directory terminal installation at a business hotel group

SHENZHEN, September 18, 2026 - Liang Shu, AndroidSBC field desk. Before the cartons closed, every WF-G3399 board ran a 48-hour soak that kept the dual-screen high-definition guide kiosk display, network uplink and touch controller active without a single cold restart. The WF-G3399 smart guide kiosk Android motherboard order for Dublin, Ireland cleared the burn-in station on schedule and is en route via the Dublin - Rotterdam lane.

The WF-G3399 dual-screen high-definition guide kiosk production lot includes the WF-G3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Ireland integrators, the ComReg conformity plus CE marking with ComReg radio interface notification paperwork is bundled.

Filed by Liang Shu, AndroidSBC field desk, SHENZHEN. Ireland integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3399 Application Scenarios

The WF-G3399 dual-screen high-definition guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3399-A configuration is the typical build for the hotel lobby and resort directory terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3399 plus WF-G1330 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1331 plus WF-G3399 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G6180 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G5270 plus WF-G1330 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1331 plus WF-G5270 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1330 plus WF-G6180 carry the guest orientation flow in Dublin.
• Exhibition and museum interpretive display points: WF-G3399 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G5270 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Dublin: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Dublin Buyers

AndroidSBC opens OEM, ODM and distribution tracks on the WF-G family for Dublin and Ireland, all backed by one Shenzhen production line and one firmware baseline.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The practical benefit for Dublin and Ireland is that a partner can quote a stock SKU today and a custom variant next quarter without changing factories, firmware or certification files.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen high-definition guide kiosk?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-G family with dual-screen high-definition guide kiosk pre-loaded as a stock configuration, and every silicon tier carries the same firmware baseline and the same directory and wayfinding application interface.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-G family?

Answer: Within the WF-G family, RK3399 sits on a defined rung. RK3588 is the multi-screen and AI advisory tier; RK3568 and RK3566 are the mid tier for dual-screen directories, enquiry counters and wayfinding banks; T527 is the industrial and outdoor tier with a -40C to 85C silicon rating; RK3288 and RK3399 keep legacy estates and 28nm designs in production; A133 and H618 are the cost-driven entry tier for price check and promotional screens. All eight share one Android driver base.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Ireland?

Answer: Yes. CE / FCC / RoHS are stock; UKCA, KC, PSE, SAA, UL and CCC are handled per destination. For Ireland AndroidSBC bundles ComReg conformity and CE marking with ComReg radio interface notification into the same carton that clears Port of Dublin.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: For Dublin and Ireland buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC develops custom firmware in-house at the Longgang facility, covering AOSP builds, kernel drivers, boot animation, pre-installed apps and OTA staging logic. The Ireland team receives the build tree, not just a binary image.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-G family. In practice that means security patches, driver updates and content client updates are published on a maintained branch, and Dublin integrators choose when to take them.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the ComReg documentation set for Ireland customs at Port of Dublin.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: RMA and DOA are handled at the source. DOA boards are replaced from Shenzhen buffer stock on photo or video evidence, and RMA units are repaired or replaced at the Longgang facility with a defined turnaround written into the supply agreement.

Contact AndroidSBC: Start Your WF-G3399 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Dublin integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Dublin and Ireland the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.