RK3588 Debian Custom Motherboard, WF-C3588-M2, AndroidSBC, Dublin

TL;DR: RK3588 Debian Custom Motherboard

Dublin, Ireland - September 12, 2026. Wanlin Longgang confirmed lot 399 this week: 11,815 WF-C3588-M2 boards for Dublin, Ireland, released with the per-lot certification pack and a unit-level burn-in record.

AndroidSBC supply-chain sourcing update on the Rockchip RK3588 custom board allocation serving Dublin, Ireland. The nine custom variants run from a custom Android motherboard through to a core-board-plus-carrier programme, all on the same Rockchip RK3588 octa-core 8nm silicon. AndroidSBC builds the line at the Longgang source factory in Shenzhen, with variant-specific I/O, thermal and enclosure options tied to the deployment profile. A Dublin buyer can hold one platform, one firmware image set, and one documentation format across custom Android, industrial, SOM, signage, kiosk, robotics, NVR, edge AI and ARM PC work.

About AndroidSBC and the Rockchip RK3588 Board Family

Wanlin Manufacturing Group builds the WF-C3588 at its Longgang plant in Shenzhen and sells it overseas through AndroidSBC. The programme covers nine custom motherboard categories on the Rockchip RK3588 octa-core 6 TOPS NPU platform, which is unusual for a single source factory: most suppliers specialise in one category. That breadth is what Ireland importers tend to notice first, because it lets a Dublin distributor quote a custom Android smart display and a custom industrial controller on the same purchase order. Alongside the boards, Wanlin runs the OEM branding line, the ODM carrier design desk and the certification desk that produces the CE, FCC, UKCA, RoHS and IEC 62368-1 documentation for each shipment.

WF-C3588-M2 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-M2 (Custom Core Board SOM with Carrier Board Design Service) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Ireland importers sourcing the WF-Series, the 16GB + 64GB (WF-C3588-M2-C) variant is the typical configuration for the custom core board and SOM plus carrier programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Core Board SOM with Carrier Board Design Service for Ireland Buyers

For Ireland procurement teams, the first surprise on the custom core board som with carrier board design service line is rarely technical. It is that the sample arrives on time and the production lot does not, because the Rockchip RK3588 allocation cannot be conjured from broker stock when a 11,815-unit order is confirmed. The second risk sits in the firmware image. Boards that pass a bench boot can still fail the certified stack the buyer's channel requires, and that gap usually appears during inbound inspection rather than before shipment.

The third exposure is the file behind the mark. A CE stamp without a dated test report and a Declaration of Conformity is a marking without substance, and the moment it matters is the moment a Ireland customs officer asks for the underlying document. AndroidSBC answers this by doing the customization, the software burn and the documentation at the Longgang plant on every lot, with a per-unit QR that traces back to the burn-in record. For Dublin importers serving custom Android, industrial, signage, kiosk, robotics, NVR, edge AI and desktop verticals, the nine WF-C3588 custom variants cover the SMARC 2.2 modules, stamp-hole core boards, LGA core boards, COM Express carriers, medical imaging terminals, robotics compute modules, custom carrier designs, and OEM development kits deployment lanes directly, with three memory configurations per variant.

Compliance for Ireland is handled at the factory rather than after arrival. In Ireland the market is served by Dublin-based distributors who often also cover Northern Ireland, so one listing can reach two regulatory regimes. The Longgang export desk builds the destination-market file for CE marking with ComReg radio interface notification administered by ComReg and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Dublin on the Dublin to Rotterdam relay.

Competitive Comparison: WF-C3588-M2 vs Competing RK3588 Boards

Three groups of board compete for the custom core board som with carrier board design service socket. The first is catalogue silicon sold on price with no customization route and no certification file. The second is re-badged stock where the seller cannot produce a schematic or a test report. The third is a genuine custom platform on Rockchip RK3588 with the engineering desk, the burn-in rack and the certification file in one Longgang building. The WF-C3588-M2 sits in the third group.

• vs standard SOM catalogues: the WF-C3588-M2 either matches SMARC 2.2 exactly or the carrier is redesigned around the project, so the module never forces the product.
• vs two-vendor module plus carrier splits: core board and carrier come from one desk, one schematic review and one test plan, which removes the finger-pointing stage entirely.
• vs closed-module vendors: BSP source, SDK and documentation ship with the project, so a customer engineering team can maintain the carrier after delivery.
• vs re-branded modules: the SI report and the thermal map are Longgang documents, not forwarded PDFs from a third party.

Global Custom SOM and Core Board Market Trends

The Custom SOM and Core Board market is the frame that decides how Ireland importers time their custom core board som with carrier board design service orders. The figure most Ireland buyers quote when they argue about allocation is the Edge AI hardware segment, which MarketsandMarkets sizes at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030); it is the public proxy for the RK3588-class silicon that custom board buyers compete for, not a forecast for this category. For Dublin, three buying patterns are shaping the WF-C3588 order book:

• Medical imaging terminal: a device maker keeps its regulatory file intact by swapping the core board and reusing the validated carrier.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-M2 board carries that headroom without a board change.
• Custom SMARC migration: a legacy SMARC installation moves to RK3588 with a pin-compatible carrier revision and keeps the enclosure.

The Custom SOM and Core Board outlook in Ireland is being read less as a demand question and more as a supply-chain question, because demand has outrun reliable allocation.

In all three cases, Dublin buyers are converting spot quotes into blanket orders with a monthly lot release, because a custom motherboard programme that has to hold a twelve-month shipping window cannot tolerate a mid-year allocation break.

Partner Success Story: Cedarline Media Networks in Dublin, Ireland

Cedarline Media Networks, a DOOH network operator serving the Ireland market, deployed 8,400 custom WF-C3588-S3 video wall boards for a control room and street network. The rollout covered the medical imaging terminal, custom smarc migration, and machine vision carrier workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 8,400 custom WF-C3588-S3 video wall boards for a control room and street network
• Region: Dublin, Ireland
• Models used: WF-C3588-M2 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Dublin via the Dublin to Rotterdam relay

"Twelve tiles, three boards, one head-end. The 8K decode carried the new line-map asset on first boot, and the OTA channel pushes firmware to street cabinets without a truck roll. AndroidSBC burned our CMS into the image before the lot shipped."

- Yasmine El-Sayed, IT Director

Field Report: a retail chain signage refresh across Dublin, where 11,815 units of the WF-C3588-M2 board replaced legacy players in store windows

Reporter Cao Wen, on the ground in Dublin, Ireland. Crews worked store by store overnight so trading hours were never interrupted. The WF-C3588-M2 boards took the estate content package on first boot and reported back to the CMS within the hour. The chain's marketing team re-cut the window loop at 4K once the fleet was live, because the old players had capped it at 1080p.

Pallet weights were checked against the packing list at the dock, and the container was sealed 25 minutes before the cut-off.

The inspection confirmed three things on the spot: the WF-C3588-M2 units hold the burn-in with a yield above 99.51 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ComReg radio interface notification administered by ComReg, cleared for entry at Port of Dublin on the Dublin to Rotterdam relay. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Ireland importers can hand straight to their customs broker.

Filed by Cao Wen, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-M2 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-M2 (Custom Core Board SOM with Carrier Board Design Service) as the lead SKU for Dublin and Ireland programmes:

• Medical imaging terminal: a device maker keeps its regulatory file intact by swapping the core board and reusing the validated carrier.
• Robotics compute module: an AMR maker takes the stamp-hole core board and designs a slim carrier for a new chassis generation.
• Custom SMARC migration: a legacy SMARC installation moves to RK3588 with a pin-compatible carrier revision and keeps the enclosure.
• OEM development kit: a product team gets the reference carrier, the SDK and the BSP source and prototypes before committing to tooling.
• LGA core board programme: a display brand solders the core board directly onto its own mainboard for a locked BOM.
• Machine vision carrier: a vision integrator routes MIPI CSI-2 lanes to four cameras and lets the NPU carry the inspection model.
• Fleet compute module: a telematics supplier builds one carrier for three vehicle programmes and swaps memory options per contract.
• Lab instrumentation: an instrument maker keeps a decade-old enclosure alive by replacing only the core board and the BSP.

Partnership Models for Dublin Buyers

For Dublin importers and brand owners, the WF-C3588-M2 and the rest of the WF-C3588 custom variants are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Every tier draws on the same Longgang line and the same certification desk. A Dublin first order on the WF-C3588-M2 normally lands on the 16GB + 64GB (WF-C3588-M2-C) configuration at MOQ 5,000 units per shipment, with standard samples in 1-3 days and a 15-30 day mass-production window on custom builds.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how Ireland partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: The structure is deliberately two-speed: 1-3 days for a standard-variant sample so a Ireland project team can start immediately, and 15-30 days to mass production on a custom run once the design freezes. MOQ is 5,000 units per shipment on standard variants, with custom and pilot quantities negotiated against the annual volume commitment.

What certifications does a custom board need for Ireland, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum, written into the framework agreement. The RK3588 platform carries a long industrial lifecycle, and Wanlin commits to the supply window, to security patches across the Android, Ubuntu LTS, Debian LTS and Yocto tracks, and to OTA update infrastructure for field-deployed units. For a custom board that is the whole point of going to a source factory: the product lifecycle is a contract term, not a hope.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-M2 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a Ireland integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-M2 Sourcing Conversation

The AndroidSBC export desk handles all WF-C3588 enquiries from Dublin and Ireland. Direct factory contact for the custom core board som with carrier board design service is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ComReg radio interface notification for Ireland, administered by ComReg, entering at Port of Dublin on the Dublin to Rotterdam relay
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start a custom review, send the target volume, the I/O and memory changes required, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-C3588 variants within two business days.